Installing Multiple Hubs; Figure 3-1. Daisy-Chaining Two Model Fe108 Hubs - NETGEAR FE104 - Hub Installation Manual

Installation Guide for the Model FE104 and Model FE108 Fast Ethernet Hubs

Installing Multiple Hubs

This section provides you with information about installing multiple hubs. As illustrated in
Figure 3-1, two hubs can be simply daisy-chained together. In Figure 3-2, multiple hubs are
connected to a server through the Model FS104 10/100 Mbps Fast Ethernet Switch.
After you have installed your hubs using one of the methods shown, connect the power adapter to
the wall, and proceed to "Verifying Your Installation."
Model FE108 hub
Key:
1 = Model FE108 Fast Ethernet Hub (Normal/Uplink push button set in Uplink position)
2 = Model FE108 Fast Ethernet Hub (Normal/Uplink push button set in Normal position)
3 = PCs with 100 Mbps connection
Figure 3-1. Daisy-chaining two Model FE108 hubs
3-4
1
Model FE108 hub
3
2
359EA
Installation