Emerson ES920 Owner's Manual page 33

To Set The 'OFF' Time
6.) Press the MODE button on the front panel
or the remote control repeatedly until the
" OFF" indicator is flashing in the
display.
7.) Press the MEMORY button on the front
panel or remote control.
The Hour digits begin flashing.
8.) Press the or
or PM.
9.) Press the MEMORY button on the front
panel or remote control to memorize the
' Off' hour setting.
The Minute digits begin flashing.
10.)Press the or
display to the desired turn off minute.
Press MEMORY button once again to
memorize the ' Off' minute setting.
Only the " " indicator continues flashing.
Press the MODE button after completing step 10 above.
The " ON OFF" indicator and current time
will be shown on display.
The ON/OFF Timer is now activated.
ES920_102104.p65
buttons to set the display to the desired turn off hour, , AM
buttons to set the
32
32 21/10/2004, 12:06