Pause Control - Emerson ES830 Owner's Manual

4.) The disc will spin for a few seconds as the player
reads the disc.
Then the disc will stop and the display will show
the total number of tracks on the disc.
5.) Press the PLAY/PAUSE button to begin playback on track 1.
Track number "0 1" appears in the display and the
Play indicator comes ' On' .
6.) Adjust the VOLUME and X.BASS controls as desired.
7.) Playback will continue until the last track has played then the disc stops and
the Play indicator goes ' Off' , and the display will show the total number of
tracks on the disc.
To stop playback before the disc ends press the
8.) If you are finished listening open the CD door and remove your disc.
9.) To listen to the Tuner or AUX, press the FUNCTION button as desired, or
press the STANDBY button to turn the power ' Off' .

PAUSE Control

To pause momentarily during CD playback press the
the top panel again.
The sound stops and the Play
but the disc continues to spin.
Press the PLAY/PAUSE button again to cancel the Pause mode and resume
normal playback.
The sound resumes at the same point on the disc and the Play
flashing.
ES830_012005.p65
indicator flashes
21
21
STOP/BAND button.
PLAY/PAUSE button on
indicator stops
20/1/2005, 11:15