Setting The Clock - Emerson ES79 Owner's Manual

Home audio system with vertical cd player and digital am/fm receiver

Table of Contents

Setting The Clock

When the system is connected to an AC outlet the time display will show a flashing

"AM 12:00 ".

This is your indication that the time is incorrect

and needs to be set.

Note: Although it is not necessary to set the clock in order to listen to the radio

or CD player, the clock must be set correctly if you intend to use the timer to

turn the system ' On' and ' Off' automatically.

Set the clock as follows:

1.) Press the MEMORY button on front panel

or on remote control once.

The ' Hour' digits begin flashing.

2.) Repeatedly press the

the display to the correct hour, AM or PM.

3.) Press the MEMORY button again to set

the hour.

The ' Minute' digits begin to flash.

4.) Repeatedly press the

the display to the correct minute.

5.) Press the MEMORY button again to set

the minutes.

Only the colon " : " continues flashing.

The clock begins to run.

ES79_080504.p65

buttons on front panel or remote control to adjust

9/8/2004, 10:21

Table of Contents