Operation; Operation With Blades - Echo SRM-266/S Operator's Manual

SRM-266/S

OPERATION

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause
unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit
so that exhaust is directed away from your face and body.
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if
the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or
regulations regarding fire prevention requirements.

Operation With Blades

Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield, barrier
bar or U-handle, and harness can result in serious personal injury. Follow installation instructions.
TO USE
THESE
BLADES
You
must
install
these
parts!
DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS.
• Arbor Diameter of Upper Blade Plate must match arbor diameter of blades.
• New cotter pin required each time blade is installed.
• Brush cutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness.
Note: The Barrier Bar is used to restrict rearward movement of the unit. The Barrier Bar is NOT A HANDLE
and should not be gripped when using or carrying the unit.
X7502026002
© 3/2013 ECHO Inc.
Pro Maxi-Cut
Grass/Weed
Blade
Loop Handle, w/or
w/o Barrier Bar
Plastic Shield
Harness
Upper Plate &
Flat Washer
Hex Nut
New Cotter Pin
Rigid Plastic
Tri-Cut
Grass/Weed Blade
U-Handle or Loop Handle
w/Barrier Bar
Plastic Shield
Harness
Upper Plate
& Glide Cup
Hex Nut
New Cotter Pin
OPERATION
Metal Blade
U-Handle or Loop Handle
w/Barrier Bar
Metal Shield
Harness
Upper/Lower
Blade Plates
Hex Nut
New Cotter Pin
15