To Advance Trimmer Line; Remove Nylon Line Head; Front Handle Installation - Echo SRM-266/S Operator's Manual

ASSEMBLY

To Advance Trimmer Line

See Maintenance Section for nylon line replacement.
Note: To advance trimmer line, tap trimmer head against the ground while the head is turning at normal
operating speed.

Remove Nylon Line Head

Note: Do not disassemble nylon line head.
1. Align locking hole in upper plate with notch in edge of gear
housing and insert head locking tool (D).
2. Remove line head (E) by turning it clockwise until head is
completely off of shaft.
3. Remove locking tool (D).

Front Handle Installation

Note: Label shows minimum spacing for front handle location.
1. Position front handle for comfortable operation and secure
screws.
14
SRM-266/S
D
E
MIN
SPACING
X7502026002
© 3/2013 ECHO Inc.