Table of Contents
Advertisement
3.1 Configuring and controlling the projector via a web browser (continued)
Item
Network Control
Authentication
Password
Re-enter
Authentication
Password
SNMP
Community name
Click [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• Only numbers '0-9' and alphabet 'a-z', 'A-Z' can be used.
Configures the Authentication password for the command
control.
Configures the Authentication password. The length of the text
can be up to 32 alphanumeric characters.
Reenter the above password for verification.
Configures the community name if SNMP is used.
Configures the community name. The length of the text can be
up to 64 alphanumeric characters.
3. Network Functions
Description
27
Advertisement
Table of Contents
