Crestron E-Control - Dukane 8755N User Manual

3. Web Control

3.2 Crestron e-Control

The Main window as shown above is
displayed at first. However, if you have
enabled User Password on the Tools window
(&46), a dialog prompting you to enter
the password as shown on the right will be
displayed, and no operation is enabled until
you have entered the password. After entering
the preset password, the dialog disappears
and the Main window will be displayed.
As shown below, you can open a window by
clicking the corresponding tab at the top right
of the window.
Tab
Logout
Tools
Info
Contact IT Help
NOTE
• If Crestron e-Control in the Network Settings (&21) is set to
Disable, Crestron e-Control
Crestron e-Control and close the web browser. Next, restart the web browser,
followed by entering the projector's IP address.
• Only English is supported on Crestron e-Control
• If the connection is terminated, the "Loading..." screen will appear. Check the
connection between the projector and the computer, then return or refresh the
Web page.
42
®
Logs out from e-Control
This tab appears only when User Password of the Tools window is
enabled.
Opens Tools window (&45).
Opens Info window (&47).
Opens Help Desk window (&48).
cannot be used to operate the projector. Enable
®
User Password dialog
Description
®
.
.
®
Tab