Table of Contents
Advertisement
DNS Server IP
Address
D
e
t
a
i
l
s
D
e
t
a
i
l
To use PPTP as the accessing protocol of the internet, please choose Internet Access from
WAN menu. Then, select PPTP mode for WAN2. The following web page will be shown.
PPTP Setup
ISP Access Setup
ISDN Dial Backup
Setup
Vigor2910 Series User's Guide
specific MAC address for access authentication. In such cases you
need to click the Specify a MAC Address and enter the MAC
address in the MAC Address field.
Type in the primary IP address for the router if you want to use
Static IP mode. If necessary, type in secondary IP address for
necessity in the future.
P
a
g
e
f
o
r
P
P
T
P
s
P
a
g
e
f
o
r
P
P
T
P
PPTP Link - Click Enable to enable a PPTP client to establish a
tunnel to a DSL modem on the WAN interface.
PPTP Server - Specify the IP address of the PPTP server.
Username -Type in the username provided by ISP in this field.
Password -Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup - You can type in four sets of time
schedule for your request. All the schedules can be set previously
in Application – Schedule web page and you can use the number
that you have set in that web page.
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click Internet Access
Setup > Dialing to a Single ISP to enter the backup profile.
Due to the absence of the ISDN interface in some models, the
ISDN dial backup feature and its associated setup options are not
available to them. Please refer to the previous part for further
information.
None - Disable the backup function.
27
Advertisement
Table of Contents
