1. Manual Ignition with "Piezo igniter"
1. Open the valve of the gas cylinder.
2. Open the shut-off valve to the gas supply.
A
2. Manual Ignition with "battery igniter"
7. Release igniter button (C). Keep rotary switch (B) depressed for another 10-15
seconds, then release.
8. Check the flame indicator to see whether a flame is burning.
9. Repeat the entire process if the flame has gone out.
10. Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.
Temperature setting cooling compartment
5.2.4
The cooling unit's performance is influenced by ambient temperatures.
At ambient temperatures of +15°C up to +25°C, set the knob B to the
T T I I P P
middle position. The cooling unit works with optimal performance.
3. Set energy
selector switch
(A) to
5. Activate Piezo
C
ignition (C)
several times at
intervals 1-2
seconds.
3. Set energy
selector switch
(A)to
5. Activate ignition
C
by pressing the
button (C) and
keep it depressed.
As shown, you are able to regulate the temperature of
B
the cooling compartment, if necessary, by turning
rotary knob (B)
middle position
8
4. Press and hold
rotary switch (B)
B
6. Check the inspection glass to
see whether there is a flame
(the inspection glass is insi-
de the refrigerator at the
bottom left).
4. Press and hold
rotary switch (B)
B
6. Once the flame has been ignited
and is burning, the needle of the
galvanometer passes over into the
green section.