Led Digital Display Window; Jets Button - Dimension One Spas AQUATIC FITNESS SYSTEM 2003 Owner's Manual

LED Digital Display Window

Jets Button

Pushing the JETS Button will disable any concurrent filter cycle.
Aquatic Fitness System
2003 Owner's Manual
LED Digital Display Window: This window displays the actual
water temperature in either F or C. It will also display time, filter cycle
start time, filter cycle duration time, and the number of filter cycles.
When you are setting the "target temperature" for your water, this
window will display the target temperature. After a brief pause, about
5 seconds, the window will return the display to the actual water
temperature.
Jets Button: Press the button once to turn on the pump to Low
Speed. A second press will turn it to High Speed. A third press will
typically turn the pump off, unless the pump has been automatically
activated during a heating cycle – in which case a third press will return
the pump to the Low Speed. The Jets Indicator Light, next to the Jets
Button, will be lit while the pump is running. A Jet Pump Icon will also
display in the upper left corner of the LED Digital Display Window
whenever the pump is running.
A built-in timer will automatically shut the pump off after 30 minutes of
operation unless you turn it off manually. When the pump is first
turned on, a small scale will be displayed in the lower left corner of the
LED Digital Display Window.
This Jet Button controls water flow only for the spa side of the
AquaFit Dual Temp.
When the Jets Indicator Light, the Light Indicator Light, and the Heat
Indicator Light are flashing, they indicate a problem with your spa. See
the Troubleshooting Section for more details.
19