When installing or replacing an internal drive, it is important to note the type and size of the drive that you
can install or replace in each bay and correctly connect the cables to the drive installed. Refer to the
appropriate section in Chapter 2 "Installing or replacing hardware" on page 13 for instructions on how to
install or replace internal drives for your computer.
Figure 5 "Drive bay locations" on page 11 shows the locations of the drive bays in your computer.
Figure 5. Drive bay locations
1
Bay 1 - Optical drive bay (with an optical drive installed in some models)
2
Bay 2 - Slim card reader drive bay
3
Bay 3 - Primary SATA hard disk drive bay (with a 3.5-inch SATA hard disk drive installed)
4
Bay 4 - Secondary SATA hard disk drive bay
.
Chapter 1
Product overview
11