Auto Info Display; Image Dust Off Ref Photo - Nikon D5200 Reference Manual

Auto Info Display

If On is selected, the information display will appear after the shutter-release button
is pressed halfway; if image review (0 149) is off, it will also be displayed immediately
after shooting. Choose On if you find yourself frequently referring to the information
display during shooting. If Off is selected, the information display can be viewed by
pressing the P button.

Image Dust Off Ref Photo

Acquire reference data for the Image Dust Off option in Capture NX 2 (available
separately; for more information, see the Capture NX 2 manual).
Image Dust Off ref photo is available only when a CPU lens is mounted on the
camera. A lens with a focal length of at least 50 mm is recommended. When using a
zoom lens, zoom all the way in.
1
Choose a start option.
Highlight one of the following options and press
J. To exit without acquiring image dust off
data, press G.
• Start: The message shown at right will be
displayed and "rEF" will appear in the
viewfinder.
• Clean sensor and then start: Select this option to
clean the image sensor before starting. The
message shown at right will be displayed and
"rEF" will appear in the viewfinder when
cleaning is complete.
D
Image Sensor Cleaning
Image Dust Off reference data recorded before image sensor cleaning is performed
can not be used with photographs taken after image sensor cleaning is performed.
Select Clean sensor and then start only if the Image Dust Off reference data will not
be used with existing photographs.
2
Frame a featureless white object in the viewfinder.
With the lens about ten centimeters (four inches) from a well-lit, featureless
white object, frame the object so that it fills the viewfinder and then press the
shutter-release button halfway.
In autofocus mode, focus will automatically be set to infinity; in manual focus
mode, set focus to infinity manually.
171
G button B setup menu
G button B setup menu