Miele cva 610 Operating Instructions Manual page 50

50
The brew unit is clogged. Clean the brew unit filters.
Check if the grinder is set
to the coarsest or to the
finest setting.
The coffee is not fresh.
The coffee dispensers are
set too high.
Check the temperature
setting of each drink
option.
Coffee beans are
blocking movement.
This is not a fault. This is
water residue from the
cleaning process.
The brew unit is only ac-
cessible, when the waste
unit is removed.
If the brew unit can not be
removed even when the
waste unit is removed it is
not in the basic position.
The brew unit is not in the
basic position.
Adjust the coffee grinder
setting.
Use fresh coffee beans.
Lower the height adjust-
able dispensers.
If the temperature is too
high, the crema will
collapse.
Close the unit and
dispense a coffee.
The slide control can now
be moved.
Close the door and turn
the appliance on.
The brew unit will reposi-
tioned itself into the basic
position.
The funnel must be lifted
up and the connection
piece must be in an
upright position.
See "Coffee system care/
Resetting the basic
position".