24C16 16Kbit Eeprom - Daewoo DWP-28W2ZLF Service Manual

Appendix
1-6 24C16 16 Kbit EEPROM
features :
- 16 Kbit serial I2C bus EEPROM
- Single supply voltage : 4.5 V to 5.5 V
- 1 Million Erase/Write cycles (minimum)
- 40 year data retention (minimum)
Pin description
Pin No. Name
1, 2, 3 E0, E1, E2
5 SDA
6 SCL
7 WC
8 Vcc
4 Vss
The memory device is compatible with the I2C memory standard. This is a two wire serial interface that
uses a bi-directionnal data bus and serial clock. The memory carries a built-in 4-bit unique device type
identifier code (1010) in accordance with the I2C bus definition.
Serial Clock (SCL)
The SCL input is used to strobe all data in and out of the memory.
Serial Data (SDA)
The SDA pin is bi-directionnal, and is used to transfer data in or out of the memory
Block diagram TDA6107Q
Description
Device address
Serial Data/Address Input/Output
Serial clock
Write control
Supply voltage
Ground
- 18 -
Service manual WP-795