24Wc16 - 16 Kb Eeprom - Daewoo DTL-2950K Service Manual

4.5 24WC16 - 16 KB EEPROM

Features :
16 Kbit serial I2C bus EEPROM
400KHz I2C Bus Compatible
supply voltage : 1.8 V to 6.0 V
Low Power CMOS Technology
1 Million Erase/Write cycles (minimum)
100 year data retention (minimum)
Pin description
Pin No. Name
1, 2, 3 A0, A1, A2
5 SDA
6 SCL
7 WP
8 Vcc
4 Vss
The memory device is compatible with the I2C memory standard. This is a two wire serial
interface that uses a bi-directional data bus and serial clock. The memory carries a built-in 4-bit
unique device type identifier code (1010) in accordance with the I2C bus definition.
Serial Clock (SCL)
The SCL input is used to strobe all data in and out of the memory.
Serial Data (SDA)
The SDA pin is bi-directional, and is used to transfer data in or out of the memory.
DTV R&D Europe
Block diagram TDA6107AJF
Description
Device address – not used
Serial Data/Address Input/Output
Serial clock
Write control
Supply voltage
Ground
CP-650 Service Manual
30