Emerson Research iP500 Owner's Manual page 32

3.) Press the Function button on this system to select the iPod
The "iPodShuffle" indicator appears in the display.
4.) Press the Volume + / – buttons on this system to
adjust volume until the Volume Level Indicator
display is showing "25".
5.) Press the iPod Play/Pause button on the iPod
in either the Normal or Shuffle mode, according to your selection in Step 1
above.
NOTE: Pressing the
®
for the iPod Shuffle.
6.) Press the Volume + / – buttons on the iPod
level. If necessary you can then go back and make final up or down adjustments
to the Volume controls on this system.
7.) To skip forward or back, to perform high-speed search, to pause or to stop
playback, press the corresponding controls on the iPod
8.) When you are finished listening, remove the iPod
replace the protective cap.
9.) Press the Power button on this system to turn the power ' Off' .
iP500_042307.p65
iPod PLAY/PAUSE of this system has no effect
®
Shuffle to adjust the iPod
31
31
® Shuffle function.
®
Shuffle to begin playback
®
volume
® Shuffle as usual.
® Shuffle, switch it ' Off' , and
23/4/2007, 17:01