Emerson Research iP500 Owner's Manual page 30

Removing or Changing The iPod
If you will be using different ' dockable' iPod
have to install the appropriate adapter in the docking area for each different
iPod ® model. The procedure for removing and changing the iPod
as follows:
1.) Remove your iPod
2.) Lift up on the docking cradle and remove it from the docking station as
shown.
3.) Press on the bottom of the iPod
docking cradle.
iPod ® Adapter
Docking Cradle
(Bottom up)
4.) Re-install the docking cradle in the docking station.
5.) Insert the desired iPod
iP500_042307.p65
®
from the docking station as usual.
® adapter as shown to remove it from the
®
adapter in the docking cradle.
29
29
® Adapter
® models with this system you will
23/4/2007, 17:01
® adapter is