Picture Adjustment - Emerson LC321EM9 Owner's Manual

Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "PICTURE", then press
[ENTER].
3
Use [Cursor K / L] to select the item you want to adjust,
then press [ENTER].
4
Adjust the picture quality.
Picture Mode
Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Standard, Dynamic, Movie and News)
Brightness, Contrast, Color, Tint, Sharpness
Use [Cursor s / B] to adjust.
Picture Picture
Dynamic
Picture Mode
30
Brightness
Contrast 30
Color 30
Tint
0
Sharpness 0
Reset Settings
Color Temp. Neutral
Picture Picture
Picture Mode Standard
Brightness Dynamic
Contrast Movie
Color News
Tint
Sharpness
Reset Settings
Color Temp.
5
Brightness
Brightness 30
Adjust Move Enter
ENTER
Contrast
Contrast 30
Adjust Move Enter
ENTER
Color
Color 30
Adjust Move Enter
ENTER
Tint
Tint 0
Adjust Move Enter
ENTER
Sharpness
Sharpness 0
Adjust Move ENTER Enter
Reset Settings
Use [Cursor K / L] to select "Reset", then press [ENTER]
to restore "Picture Mode" settings to the default.
Color Temp.
Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Cool, Neutral and Warm)
Press [SETUP] to exit.
Note:
• To cancel picture adjustment, press [SETUP].
• When this unit is connected to DVI devices, you cannot
select "Sharpness".
Cursor s Cursor B
to decrease to increase
brightness brightness
to decrease to increase
contrast contrast
to decrease to increase
color intensity color intensity
to add red to add green
to make soft to make clear
Reset Settings
Reset Settings
Cancel
This function resets the Reset
"Dynamic" setting for Picture
Mode to factory default.
Picture
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings Cool
Color Temp. Neutral
Warm
21
EN