Watching Channels From An External Device; Changing Picture And Sound Settings; Sleep Timer; Switching Audio Mode - Emerson LD280EM4 Owner's Manual

Watching channels from an external device

Switching Each Input Mode can easily switch with the Remote Control
between TV (DTV or Analog TV) and external devices when they are
connected to the unit.
1
Turn On a Set-top Box or a connected device.
• The picture from the Set-top Box or the connected device might
appear automatically on the TV Screen.
If the picture does not appear
Press SOURCE repeatedly to select the Set-top Box or the
connected device and wait a few seconds till the Picture appears.
e.g.)
11.1
DTV / Analog TV
channel
Source
TV
HDMI
Video
Video
• Pressing reverses the direction of the Input modes.
2
Use the Remote Control of the Set-top Box or the connected
device to select Channels.

Changing Picture and Sound settings

1
Press PIC/SOUND MODE to set your TV to a predefined Picture
and Sound setting.
2
Use to select one of the following settings :
Auto picture Auto sound
Personal
Standard
Vivid
Sports
Movie
Game –
Eco –
– Music
– News
HDMI
Description
The customized settings you defined using
the Picture and Sound menu
For normal TV viewing
Enhanced picture contrast, sharpness and
sound for viewing in a well-lit room
Brilliant picture settings and clear sound for
high action
Deep picture and powerful sound settings
for a cinematic experience
Optimized for PCs and game consoles
Eco TV settings for low power
consumption
Optimized for music playback
Controls picture tone and set the anchor's
voice at a comfortable volume

Sleep timer

Sleep Timer can set the unit to go into Standby mode after an
incremental period of time.
Press SLEEP repeatedly to change the amount of
time (increases the time by 30 minutes up to 120
minutes).
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until Off is displayed.

Switching Audio mode

Digital TV operation
1
Press SAP / AUDIO to display the currently selected
Language and the number of available Languages.
2
Press SAP / AUDIO repeatedly to cycle through the
available Audio Languages.
Note(s)
• Available Languages differ depending on the broadcast.
• Other is displayed when the Audio Language cannot be acquired or the acquired
languages are other than English, French or Spanish.
Analog/Cable TV operation
1
Press SAP / AUDIO to display the currently selected Audio mode.
2
While receiving an MTS broadcast, press repeatedly
to cycle through the available Audio Channels.
e.g.) When all Audio Modes are available
SAP/STEREO SAP/MONO
STEREO :
Outputs Stereo Audio
SAP : Outputs a Second Audio Program
MONO : Outputs Mono Audio
19
English
Sleep 120min.
11.1
English 1/3
11
SAP / STEREO
SAP/STEREO
Continued on next page.