Hunter 21313 Owner's Manual And Installation Manual page 14

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-3. First install included 14W CFL bulbs into the sockets.
7-4. Thread the light and fan pull chains through the hole in the center
of the glass bowl. Then, thread the light pull chain through the hole
in the center of the cover plate.
7-5. Thread the fan pull chain through the grommet hole in the side of
the cover plate.
7-6. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-7. Thread the light pull chain through the finial and screw the finial
onto the threaded rod end until
tight.
7-8. Attach the extra pull chains
(included) to the light and fan
pull chains using the breakaway
connector. (You may find the
breakaway connector on the end
of the extra chain.)
Breakaway
Connector
14
42666-01 • 06/16/10 • Hunter Fan Company
For Light Bulbs
Metal Disc
Metal Rod
Glass Bowl
Cover Plate
Finial