Table of Contents
Advertisement
7. Configure WL500gP V2 under Vista OS
The Windows Simple Config function, which is preinstalled in the ASUS WL500gP
V2, enables the device to be configured via WCN Net process of Windows Vista.
Note: The WCN Net process of Windows Vista can only discover the device when the
device is not configured and is in the default settings state. If the device is configured,
you have to set up the device by WEB or EZsetup. Or you can push Reset button and
then begin WCN-NET setup.
1) Configuring the device
Follow the steps below to configure the device using WCN-Net process of Windows
Vista:
1. Connect the device to your PC and power on it.
2. Click Start >Network from the Vista desktop. The Network screen appears (as shown
below).
3. Double click ASUS Wireless Router.
WL-500gP V2 Wireless Router User Manual
33
Advertisement
Table of Contents
