Prepare; Connect To An Existing Speaker System; Connect Power And Switch On - Philips AW2000 User Manual

3 Prepare

Always follow the instructions in this chapter in
sequence.
Connect to an existing
speaker system
1
Unscrew the speaker connectors.
2
Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3
Screw the left red (+) connector to secure
the cable.
4
Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
6 EN
Connect power and switch
on
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC cord,
always pull the plug from the socket. Never pull the
cord.
•
Before you connect the AC cord, make sure that you
have completed all the other connections.
• Connect the AC power cord to:
• the AC IN ~ socket on the back of
the unit.
• the wall power socket.
» The unit switches on automatically.
» The power indicator blinks amber, and
after a while turns to solid amber.
• To switch the unit to normal standby
mode, press .
» The power indicator turns green.
• To switch the unit to Eco power standby
mode, press and hold .
• To switch the unit on from normal or Eco
power standby mode, press again.