Installing The Card - Panasonic HX-WA10A Owner's Manual

INSTALLING THE CARD

Before using a newly purchased card or one that was used in another device,
be sure to format it with this camera (pages 113 and 124). If an unformatted
card is used, the card itself may become unusable.
Battery cover lock
1 Push the battery cover lock to
the right to release it.
<When removing the card...>
h To remove the card, press it in,
and then release. The card will
protrude slightly, and you can
then pull it out.
1 Push the middle
2 Pull the card out straight.
2 Open
Battery cover
part of the card.
4 Insert the battery pack
(page 29), then close
3 With the label side facing up,
push the card straight in until
you hear a click.
5 Push the battery cover lock to
the left to lock it.
The colored label is visible when
the battery cover lock is not
completely closed. Be sure to
close the lock completely so that
the colored label is not visible.
Colored label
33
VQT3P50