System Setup Screen - Panasonic HPX300 - Camcorder - 1080p Operating Instructions Manual

Item
V DETAIL FREQ Sets vertical detail.
THIN: Produces fine detail.
MID: Produces less detail and wider edging.
THICK: Produces even less detail and the widest
edging effect.
• Progressive recording made at THIN or MID cause
NAME EDIT Edits the name of scene files selected using the
SCENE FILE dial.

SYSTEM SETUP screen

Item
SYSTEM MODE Specifies the signal format used by this camera.
1080-59.94i, 720-59.94P, 480-59.94i
• When a setting is changed, the message "TURN
REC SIGNAL Selects the input signal in the DVCPRO format.
CAMERA: Records the camera recording signal.
1394: Records signals input to the DVCPRO/DV
connector.
• This function is always set to CAMERA when the
REC FORMAT Selects the recording codec as well as shooting and
recording modes.
(when SYSTEM MODE is 1080-59.94i)
AVC-I100/60i, AVC-I100/30PN,
AVC-I100/24PN: Uses the AVC-I 100 codec for
recording. Shooting and recording at 60i, 30PN (native
recording) and 24PN (native recording).
AVC-I 50/60i, AVC-I 50/30PN,
AVC-I 50/24PN: Uses the AVC-I 50 codec for
recording. Shooting and recording at 60i, 30PN (native
recording) and 24PN (native recording).
DVCPROHD/60i: Uses the DVCPRO HD codec
for recording. Use CAMERA MODE options to set
shooting mode. Recording is locked to 60i.
(when SYSTEM MODE is 720-59.94P)
AVC-I100/60P, AVC-I100/30PN,
AVC-I100/24PN: Uses the AVC-I 100 codec for
recording. Shooting and recording at 60i, 30PN (native
recording) and 24PN (native recording).
AVC-I 50/60P, AVC-I 50/30PN,
AVC-I 50/24PN: Uses the AVC-I 50 codec for
recording. Shooting and recording at 60i, 30PN (native
recording) and 24PN (native recording).
(Continued on the next page)
1
Setting
horizontal lines or oblique lines that are almost
horizontal to flicker when viewed on a normal
monitor TV (60i: Interlace). THIN and MID settings
will produce higher resolution video than THICK
when shooting progressive footage that will later be
edited.
Setting
POWER OFF" appears. Then turn the power off and
turn it back on again.
power is turned on.
Notes
Notes
• Not available in USB DEVICE mode.
• Not available when the menu option
REC FORMAT is set to AVC-Intra or
DVCPRO HD during native recording.
• Not available when 1080i or 720P
is set in SYSTEM MODE and REC
SIGNAL is 1394.
• Not available in USB DEVICE mode.
____ indicates the factory setting