Deleting Clips - Panasonic HPX300 - Camcorder - 1080p Operating Instructions Manual

4
 Withthepointerlocatedinthelowerpart,move
thepointertothedesiredtextmemonumber
usingthecursorrightandleftbuttons(p/o).
Then,pressthePLAY/PAUSEbutton.
• Playback will start from the time code position of
the text memo where the pointer is located.
If the STOP button is pressed during playback
or playback finishes at the end of the clip, the
thumbnail screen appears again with the pointer
located on the text memo where playback started.
• Press the THUMBNAIL MENU button to select
EXIT or press the EXIT button to return the pointer
to the upper part of the thumbnail screen.
 NOTE
• Pressing the REC button in the text memo screen will not
start recording.
• Text memo thumbnails for AVC-Intra format clips that cannot
be played back appear in gray.
Deleting a text memo
1
 Selectthedesiredtextmemobycarryingout
steps1-for[Playingbackaclipattheposition
whereatextmemoisrecorded](page10).
2
 Movethepointertothedesiredtextmemo,and
thenpresstheSETbutton.
3
 PresstheTHUMBNAILMENUbuttontoselect
OPERATIONDELETEfromthethumbnail
menu.
• YES and NO appear to confirm deletion. Use the
cursor buttons and the SET button to select YES.
The text memo is deleted.
10
Using a text memo to break a clip and
copy the necessary portion
1
 Selectthedesiredtextmemoinaclipby
carryingoutsteps1-for[Playingbackaclip
atthepositionwhereatextmemoisrecorded]
(page10).
2
 Movethepointertothedesiredtextmemo,and
thenpresstheSETbutton.
• You can select more than one text memo.
3
 PresstheTHUMBNAILMENUbuttontoselect
OPERATIONCOPY.
4
 UsethecursorbuttonsandtheSETbuttonto
selecttheslottocopytoandselectYES.
• Copying starts.
• The portion between the selected text memo and
the next one is copied. If no text memo is found
after the selected memo, then the remainder of the
clip after the selected text memo is copied.
• If multiple text memos are selected, the selected
sections are copied.
• When the clip is being copied, the unit indicates
the progress of the copy process and cancellation
status. To discontinue the copy process, press the
SET button. Then, a YES/NO confirmation screen
is displayed. Use the cursor buttons and SET
button to select YES.
 NOTE
In clip division and copying using the text memo function, the
area copied may be automatically modified depending on the
recording format of the clip.

Deleting Clips

1
 PresstheTHUMBNAILbutton.
• The thumbnail screen appears on the LCD
monitor.
2
 Usethecursorbuttonstomovethepointerto
thecliptobedeletedandpresstheSETbutton
toselecttheclip.
3
 PresstheTHUMBNAILMENUbuttonand
selectOPERATIONDELETEfromthe
thumbnailmenu.