Specifications - Cub Cadet 53AH8ST3050 Operator's And Service Manual

SPECIFICATIONS

GENERAL INFO.
Controls:
Parking Brake:
Seat:
Frame:
Instrumentation
Front Caster Wheels:
Drive Wheels:
Tire Pressure:
Fuel Tank:
Ground Speed:
Net Weight:
ENGINE INFO.
Engine:
Type:
Air Cleaner:
Lube System:
Hydraulic System:
Starter:
Blade Brake Clutch:
TRACTION DRIVE INFO.
Traction Drive:
CUTTER DECK INFO.
Cutter Deck;Drive:
Deck Lift:
Cutting Height:
No. of Blades
Engine ignition and start switch; throttle; choke; left and right
steering levers; electric blade clutch switch; parking brake;
mower deck lift
Mechanical linkage brake handle to internal drum brakes
Adjustable seat and armrests. 4" Adjustment (fore-aft)
2" Steel structural tube and plate, all welded construction
Hour meter, Tachometer, Maintenance-minder
13 x 5.0 - 6
23 x 9.50 - 12
8-10 psi Rear, 20-25 psi front caster
Two 5 gallon w/individual shutoff valves
0-9.5 + MPH forward. 0-4.5 MPH reverse
955 lbs w/48" deck, 1035 lbs. w/60" deck
23HP for 48" & 25HPKohler for 60"
Vertical crankshaft air cooled V-Twin
Dual Paper Element with rain cap
Pressurized with oil filter
In tank filter, 3 quart capacity
12-volt electric
Electric
DUP-10 variable-output hydraulic pump connected to individual
wheel motors
48", & 60" Belt Driven
Foot lever w/pin lock for height adjustment
1" to 5" in 1/4" increments
3, belt-driven, power take-off from engine
9