I Playing A Disc; Basic Playback; General Features; Pause - Emerson EWD7003 Owner's Manual

PLAYING A DISC

Basic Playback

Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
• Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
1 Press POWER.
2 Press OPEN/CLOSE to open disc loading tray.
3 Place the chosen disc in the tray,
with the label facing up.
4 Press PLAY.
• The tray will close automatically, and
playback will then start from the first
chapter or track of the disc. If the
playback does not start automatical-
ly, press PLAY.
• When you playback the DVD with a title menu is
recorded, it may appear on the screen. In this case,
refer to "TITLE MENU".
5
Press STOP twice to stop playback.
NOTES:
• A "prohibited icon" may appear at the top-right on the
TV screen during operation, warning that
a prohibited operation has been encoun-
tered by the DVD player or the disc.
• With DVDs that use some titles for play-
back program signals, playback may start
from the second title, or it may skip these
titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.

General Features

DVD may contain menus to navigate the disc and access
special features. Press the appropriate numerical key or use
Arrow ( L / K / B / s ) to highlight your selection in the DVD
main menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.

Pause

1 During playback, press PAUSE.
• Playback will pause and sound will be muted.
2 To continue playback, press PLAY.
DVD-V CD
1 Press MENU.
• The DVD main menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
4
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
1 Press TITLE.
• The title menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.

CALLING UP A MENU SCREEN DURING PLAYBACK

• Press MENU to call up the DVD main menu.
• Press TITLE to call up the title menu.
NOTE:
• Contents of menus and corresponding menu opera-
1 During playback, press PAUSE.
• Playback will pause and sound will be muted.
2 The disc advances by one frame each time PAUSE
is pressed.
3 To exit step by step playback, press PLAY.
DVD-V CD
1
During playback, press STOP.
• Resume message will appear on the TV screen.
2 Press PLAY, playback will resume from the point
at which playback was stopped.
• To cancel resume, press STOP twice.
– 9 –

Disc Menu

Title Menu

tions may vary between discs. Refer to the manual
accompanying the disc for details.

Step by Step Playback

Resume

DVD-V
symbol may
DVD-V
symbol may
DVD-V
DVD-V
DVD-V CD
EN