Connecting To An Amplifier Equipped With Digital Input Jacks Such As Md Deck Or Dat Deck; Connecting To A Dolby Digital Decoder; Connecting To A Tv Or A Stereo Tv That Has Component Video In Jacks - Emerson EWD7003 Owner's Manual

HOOK UPS
NOTES:
• Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for your TV, stereo system and any other components to be connected to the DVD player.

Connecting to an Amplifier Equipped with Digital Input Jacks such as MD deck or DAT deck

Use an audio coaxial digital cables (not included) for the audio connections. Connecting to an amplifier equipped with digital
input jacks such as MD Deck or Dat Deck.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
NOTES:
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD
or DAT deck.
• Set Dolby Digital to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise dis-
tortion, and may also damage the speakers.(See page 13 to set ON for Dolby Digital)

Connecting to a Dolby Digital decoder

If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, the DVD player outputs a Dolby Digital
data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital decoder, you can enjoy
a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can
be heard in movie theaters.
Use an audio coaxial digital cables (not included) for the audio connections.
Front Front
Center speaker
speaker speaker
(left) (right)
Dolby Digital,
decoder
Surround Surround
speaker speaker
(right)
(left)
NOTES:
• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup mode.
• Unless connected to a Dolby Digital decoder, set Dolby Digital to OFF for audio output in the setup mode. Playing a DVD
using incorrect settings may generate noise distortion, and may also damage the speakers.

Connecting to a TV or a Stereo TV that has Component VIDEO In Jacks

To Right (red) and Left (white)
Stereo system
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV's 75-ohm coaxi-
al antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and video outputs of the DVD
player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked
"TO TV") to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV's 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your
TV's antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked "ANT IN"), then con-
nect the RF modulator to your TV's antenna terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's antenna terminal through an RF Modulator.
AUDIO OUT
To VIDEO OUT jack
DIGITAL AUDIO
OUT PCM/
BITSTREAM
COAXIAL
To COAXIAL DIGITAL
AUDIO INPUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
AUDIO OUT
DIGITAL AUDIO
OUT PCM/
BITSTREAM
To COAXIAL DIGITAL
COAXIAL
AUDIO INPUT jack
To VIDEO OUT jack
Subwoofer
AUDIO OUT jacks
AUDIO OUT L Y
DIGITAL AUDIO
OUT PCM/
BITSTREAM
COAXIAL
R VIDEO
OUT
To Right (red) and Left (white)
ANALOG AUDIO INPUT jacks
L Y Cr COMPONENT
VIDEO OUT
To S-VIDEO OUT jack
R VIDEO Cb S-VIDEO OUT
OUT
To S-VIDEO INPUT jack
To VIDEO INPUT jack
L Y Cr COMPONENT
VIDEO OUT
To S-VIDEO OUT jack
To S-VIDEO INPUT jack
R VIDEO Cb S-VIDEO OUT
OUT
To VIDEO INPUT jack
Cr COMPONENT
VIDEO OUT
Cb
S-VIDEO OUT
To COMPONENT
VIDEO OUT jack
To COMPONENT
VIDEO INPUT jack
– 8 –
A/V-compatible
or
wide screen TV
or
[Fig. 6]
A/V-compatible
or
wide screen TV
or
[Fig. 7]
A/V-compatible
or
wide screen TV
[Fig. 8]
EN