Hitachi PW1 55PMA550 User Manual page 49

OPERATING INSTRUCTIONS
The functions of the buttons located on the bottom
of the monitor change as shown below:
▼
▼
▼
PROGRAM UP/DOWN button
(
VOLUME UP/DOWN
buttons
( ADJUST buttons)
SUB-POWER button
• ( ) indicates the function while the MENU is displayed on the screen.
Input Switching
• Input can be switched by pressing the AV1, AV2, AV3,
AV4, RGB1 or RGB2 buttons of the remote control. And
the way to return to a TV channel is as follows:
• Pressing INPUT SELECT button at RGB2 input screen.
• Pressing some PROGRAM SELECT buttons and select a TV
channel.
• Pressing PROGRAM UP/DOWN buttons at the screen without
OSD(On-screen display).
Input can be switched in the sequence of TV ➔ AV1 ➔
•
AV2 ➔ AV3 ➔ AV4 ➔ RGB1 ➔ RGB2 by pressing the
INPUT SELECT button of the monitor or the remote
control.
TV AV1
RGB2 RGB1
▼
MENU button
INPUT SELECT button
(OK button)
SELECT button)
AV2 AV3
AV4
POWER ON/OFF
button
INPUT SELECT
button
MENU
PROGRAM UP/DOWN
buttons
-
RGB/VIDEO
buttons
Size Switching
Each time the ZOOM button of the remote control is
pressed, the screen display size will change in sequence
and the status will be displayed at the bottom of the
screen.
• During TV mode
Auto Full
14:9Zoom C14:9L
• [Auto] is the mode using WSS (Wide Screen Signals) which
identify the picture format movies and programs are broadcast in.
Various broadcast stations now transmit WSS. It can be detected
and the monitor automatically switch to the correct format.
However, some broadcasters do not transmit WSS, so this
monitor will not recognize which format is being transmitted.
Therefore, Default Zoom setting in the Function Menu is used to
choose when a WSS has not been sent or has not been detected.
D / N
i +
I / II
2-4-12
A / B
P+
+
OK
P-
VOLUME
D V D
UP/DOWN buttons
FREEZE
MUTE button
ZOOM
ZOOM button
1 2 3
PROGRAM SELECT
4 5 6
buttons
7 8 9
0
AV1 AV2 AV3 AV4
RGB1 RGB2
Zoom
47