Wake To Radio - Emerson Research CKS1855 Owner's Manual

Wake To Radio

1.) Turn the radio ' On' and select the band, station, and volume level that you
wish to hear when the alarm comes on, then turn the radio ' Off' again.
2.) Reconfirm the wake up time and alarm mode settings for the alarm you are
using, Alarm 1, Alarm 2, or both alarms.
3.) Set the ALARM selector switch for one or both alarms to the "RADIO" position.
The appropriate ALARM 1 and/or ALARM 2 indicators will light up to confirm
that the alarms are set.
4.) At the selected wake up time the radio will turn ' On' . It will play for one hour
and then shut off automatically.
5.) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2
button, or press the
alarm remains set and will turn the radio on again at the same time on the
following day (depending on the Alarm Mode setting).
6.) If you do not want the alarm to turn the radio on the following day, set the
appropriate ALARM selector to the "OFF" position.
CKS1855_053007.p65
RADIO ON/OFF button. The radio will stop but the
15
15 30/5/2007, 14:16