Wake To Radio - Emerson Research CKT9100 Owner's Manual

WAKE TO RADIO

1.) Turn the radio ' On' and select the band, station, and volume level that you wish
to hear when the alarm comes on, then turn the radio ' Off' again.
2.) Reconfirm the wake up time and alarm mode settings for the alarm you are
using, Alarm 1, Alarm 2, or both alarms.
3.) Set the ALM (Alarm) selector switch for one or both alarms to the ' RADIO'
position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm
that the alarms are set.
4.) At the selected wake up time the radio will turn ' On' . It will play for one hour and
then shut off automatically.
5.) To stop the radio sooner, press either the appropriate ALM 1 or ALM 2 button,
or press the RADIO ON/OFF button. The radio will stop but the alarm remains
set and will turn the radio on again at the same time on the following day
(depending on the Alarm Mode setting).
6.) If you do not want the alarm to turn the radio on the following day, set the
appropriate ALM selector to the "OFF" position.
CKT9100_090606.p65
30
30 6/9/2006, 11:00