Cabling; Power Connection - Hitachi CPS220W User Manual

I I N N S S T T A A L L L L A A T T I I O O N N ( ( c c o o n n t t i i n n u u e e d d ) )

Cabling

* Incorrect connecting could result in fire or electrical shock. Please read this manual and
the separate "SAFETY INSTRUCTIONS".
* Before connecting, turn off to all devices to be connected.
*Before connecting, read the instruction
manuals of the devices to be
connected, and make sure that the
projector is compatible with the
device.
*The cables (Power cord, RGB cable
and other cables) may have to be used
with the core set to the projector side.
Use the cables which are included
with the projector or specified.
RGB Signal Input:
Connect the RGB IN terminal of the projector to the display signal output of the computer by the
enclosed RGB cable. Secure the screws on the connector and tighten.
For some modes, the enclosed Mac adapter is necessary. Refer to P.22 "SPECIFICATION" and
"Table 1. Example of Compatible Computer Signal" of the TECNICAL section.
NOTE: Some computers may have multiple display screen modes. Use of some of these modes will
not be possible with this projector.
Video Signal Input:
Connect the VIDEO terminal of the projector to the video signal output of the video tape recorder
by the enclosed video cable except for S-Video signal.
For S-Video signal, use the S-VIDEO terminal of the projector and the optional cable for S-Video.
Audio Signal Input:
Connect the AUDIO IN terminal of the projector to the audio signal output by the enclosed audio
cable.
RS-232C:
Connect the CONTROL terminal of the projector to the computer by the optional RS-232C cable.
Refer to the manual of the RS-232C cable for the control command.

Power Connection

WARINING
Be carful in handling the power cord according to
instructions of the accompanying manual "SAFETY
INSTRUCTIONS" and this manual.
Connect the power cord firmly. Avoid using a loose,
unsound outlet or contact failure.
Use the correct one of the enclosed power cords depending on the power outlet to be use.
Connect the AC inlet of the projector to the power outlet firmly by the power cord.
ENGLISH-6
Core
Power outlet
Power Cord
AC Inlet