External Operator Panel (On Np Model Drives Only); Figure 4.23 External Operator Panel Circuit Example - Fujitsu MBA3073NC - Enterprise 73.5 GB Hard Drive Product Manual

(4)
4.3.4
(HDD)
68
Downloaded from www.Manualslib.com
External operator panel (NP model only)
The external operator panel is installed only when required for the system. When connection is
not required, leave open the following pins in the external operator panel connector of the HDD:
Pins 21, 22 and pins 01 through 08 in CN2 and pins A1 through A12 in CN1.

External operator panel (on NP model drives only)

A recommended circuit of the external operator panel is shown in Figure 4.23. Since the external
operator panel is not provided as an option, this panel must be fabricated at the user site referring
to the recommendation if necessary.
S3
A1
C
A3
N
1
A5
A7
A10
S3
A8
A11
(*1) S4
C
N 21
2
22
(*1) For connecting the external LED to CN2.

Figure 4.23 External operator panel circuit example

manuals search engine
-ID0
-ID1
-ID2
-ID3
GND
-LED
+5V
Approx. 300Ω
LED (+5V)
-LED
(for 16-bit SCSI)
ID0
ID1
ID2
ID3
(LED)
R
(LED)
C141-E270