Preparation For Use; Unpacking And Setup - Emerson Research SmartSet CKD5808 Owner's Manual

Cd clock radio with automatic time setting system and am/fm stereo radio
Table of Contents

Advertisement

Unpacking and Set-up
• Remove the unit from the shipping carton and remove all packing material
from the unit. Please save the carton and packing material if possible in the
event that your unit ever needs to be returned for service. Using the original
carton and packing materials is the only way to protect your unit from damage
in transit.
• Carefully remove any small strips of tape that may have been used to keep the
CD door closed during shipment.
• Press on the CD door in the area marked "OPEN/CLOSE" to open the door.
Inside the CD compartment you will see a white "dummy CD" transit protection
card. This card prevents the laser pick-up from moving during shipment and it
must be removed before you can load your own CDs. Carefully remove this
transit protection card and discard it.
• Place the unit on a stable, level surface such as a table, desk, shelf, stand, etc,
out of direct sunlight and away from sources of excess heat, dust, vibration,
moisture, or humidity, and convenient to a 120V 60Hz AC outlet.
• Unwind the AC power cord and extend it to its full length.
This is important. The FM antenna is built into the AC power cord.
Battery Back-up Systems
This model has two separate battery back up systems. There is a built in 3-Volt
CR2430 long life lithium battery that will maintain the clock and alarm settings.
The lithium battery may last for up to five years or even longer, depending on the
frequency and length of the power interruptions that you experience in your home.
If AC power is interrupted the display will go off, but the lithium battery will continue
to power the clock. If the AC power is off at the wake up time, the alarm will not
operate. However if the AC power is restored within one hour of the wake up time
the alarm will come on immediately.
We have also provided a separate Sure-Alarm battery back up circuit that requires
a 9-Volt battery, not included.
If you install a 9-Volt battery, the Buzzer alarm will operate in BUZZER or MUSIC
mode, even if the power is ' Off' at the selected wake-up time.
CKD5808_031406.p65

PREPARATION FOR USE

5
5
14/3/2006, 11:32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents