Nikon COOLPIX P520 Reference Manual page 211

Display
Image cannot be
modified.
Cannot record movie.
Cannot reset file
numbering.
Memory contains no
images.
File contains no
image data.
This file cannot be
played back.
All images are hidden. No images available for a slide show.
This image cannot be
deleted.
Travel destination is in
the current time zone.
Mode dial is not in
the proper position.
Raise the flash.
Lens error
Communications
error
System error
Could not obtain GPS
data.
Cannot edit selected picture.
• Confirm the conditions that are required for editing.
• These options cannot be used with movies.
Time out error while recording movie.
Choose a memory card with a faster write speed.
No more folders can be created.
Insert a new memory card, or format the internal memory/
memory card.
No pictures in the internal memory or memory card.
• To view the pictures stored in the internal memory, remove
the memory card.
• To copy pictures from internal memory to a memory card,
press the d button and select Copy from the playback
menu.
File not created with the COOLPIX P520.
File cannot be viewed on this camera.
View file using the computer or any other devices which was
used to create or edit this file.
Picture is protected.
Disable protection.
Destination in same time zone as home.
Mode dial is between two modes.
Rotate the mode dial to select the desired mode.
• When the scene mode is Scene auto selector, you can take
a picture even if the flash is lowered but the flash will not fire.
• When the scene mode is Night portrait or R (Backlighting)
with HDR set to Off, you must raise the flash to take a
picture.
Lens error occurred.
Turn the camera off and then on again. If the error persists,
contact retailer or Nikon-authorized service representative.
Error occurred during communication with printer.
Turn off camera and reconnect the USB cable.
Error has occurred in camera's internal circuitry.
Turn off camera, remove and reinsert battery, and turn on
camera. If the error persists, contact retailer or Nikon-authorized
service representative.
The camera clock is not set correctly.
Change the location or time and determine the location again.
Cause/Solution
Error Messages
A
E11
–
21
20,
E74
20
E57
–
–
E55
–
26
39
38, 40
23
E19
23
–
E87