Wake To Radio; Wake To Buzzer - Emerson CK5048 Owner's Manual

WAKE TO RADIO

1.) Turn the radio ' On' and select the band, station, and volume level that you wish
to hear when the alarm comes on, then turn the radio ' Off' again.
2.) Reconfirm the wake up time settings for the alarm you are using, Alarm 1,
Alarm 2, or both alarms.
3.) Set the ALARM selector switch for one or both alarms to the ' RADIO' position.
The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the
alarms are set.
ALM 1 indicator
4.) At the selected wake up time the radio will turn ' On' . It will play for one hour and
then shut off automatically.
5.) To stop the radio sooner, press the RADIO ON/OFF button. The radio will stop
but the alarm remains set and will turn the radio on again at the same time on
the following day.
6.) If you do not want the alarm to turn the radio on the following day, set the
appropriate ALARM selector to the ' OFF' position.

WAKE TO BUZZER

1.) Reconfirm the wake up time settings for the alarm you are using, Alarm 1,
Alarm 2, or both alarms.
2.) Set the ALARM selector switch for one or both alarms to the ' BUZZ' position.
The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the
alarms are set.
3.) At the selected wake up time the buzzer will sound. It will continue for one hour
and then shut off automatically.
4.) To stop the buzzer sooner, press the RADIO ON/OFF button. The buzzer will
stop but the alarm remains set and will turn the buzzer on again at the same
time on the following day.
5.) If you do not want the alarm to turn the buzzer on the following day, set the
appropriate ALARM selector to the ' OFF' position.
CK5048_032404.p65
12
12
ALM 2 indicator
24/3/2004, 11:36