Setting The Clock - Emerson CK5038 Owner's Manual

Am / fm clock radio with dual alarms and nap timer

Table of Contents

OPERATING INSTRUCTIONS

SETTING THE CLOCK

When you connect the radio to your AC outlet for the first time, the display will

begin flashing "12:00" PM (Noon). The flashing will stop when you set the time.

1.) Press and release the TIME button. The display will stop flashing and you can

now proceed to set the clock.

2.) Depress the TIME button together with either the

for at least two seconds to move the display forward or backward to the

correct time. The display will move rapidly forward or backward as long as the

buttons are depressed.

3.) When the display approaches the correct time release the

buttons and then repeatedly press the

move display forward or backward, one minute at a time, until the correct time

appears on the display.

AM indicator

Note: Observe the AM indicator to make sure you have set the clock to the correct

hour, AM or PM. If the AM indicator is ' On' the time displayed is AM. If the AM

indicator is ' Off' the time displayed is PM.

CK5038_032404.p65

DOWN

buttons

DOWN N

DOWN

buttons to

24/3/2004, 11:27

Table of Contents

Show Quick Links

Table of Contents