And Spectre I & Iv+ Alert Settings; Radar Alert Settings; Pop Alert - Cobra XRS 9570 Operating Instructions Manual

14 band high-performance digital radar/laser detector with xtreme range superheterodyne technology
Table of Contents

Advertisement

Settings
Your Detector
VG-2 and Spectre I & IV+ Alert Settings
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from VG-2, Spectre I and Spectre IV+
RDDs and can provide alerts when any of these or similar devices are in use
near your vehicle.
Your detector can be spotted by Spectre IV+ RDDs, but is invisible to VG-2 and
Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and
Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I & IV+
alerts is Off.
Dim Button
Press and hold for four seconds
To Turn VG-2 and Spectre I & IV+ Alerts On and Off
While no signal
Tone
is being detected,
On = Two Beeps
press and hold the
Dim button for
Off = One Beep
four seconds.

Radar Alert Settings

The detector allows you to choose whether it will show alerts on the X, K,
and Ku Bands. The factory settings are: X Band and K Band On; Ku Band Off.
To Turn X Band On and Off
While no signal
Tone
is being detected,
X On = Two beeps
press and hold both
the Dim and Mute
buttons for
X Off = One beep
four seconds.
14 English
Spectre I & IV+
Spectre I & IV+
and VG-2 On
and VG-2 Off
Spectre
Spectre
& VG2
& V G 2
On
O f f
Voice
Visual Display
Spectre VG-2
Spectre & VG2 On blinks
On
in the display
Spectre VG-2
Spectre & VG2 Off blinks
Off
in the display
Voice
Visual Display
X On
X On blinks in the display
X Off
X Off blinks in the display
Settings
Your Detector
Radar Alert Settings
(continued)
To Turn K Band On and Off
While no signal
Tone
is being detected,
K On = Two beeps
press and hold both
the Mute and City
buttons for
K Off = One beep
four seconds.
To Turn Ku Band* On and Off
While no signal
Tone
is being detected,
Ku On = Two beeps
press and hold the
City button for
four seconds.
Ku Off = One beep

Pop Alert

The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses
a single, short-time pulse to measure the target vehicle's speed.
The Pop mode receiver senses Pop singles beyond the effective range of
Pop radar guns. As the Pop mode receiver is so sensitive, you should limit
the use of Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
To Turn Pop Alert On and Off
While no signal
Tone
is being detected,
Pop On = Two beeps
press and hold both
the Dim and City
buttons for
Pop Off = One beep
four seconds.
Voice
Visual Display
K On
K On blinks in the display
K Off
K Off blinks in the display
Voice
Visual Display
Ku On blinks in the display
Ku On
Ku Off
Ku Off blinks in the display
Voice
Visual Display
Pop On blinks in the display
Pop On
Pop Off
Pop Off blinks in the display
Nothing Comes Close to a Cobra
15
®

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spx 5500 14 band

Table of Contents