My Text Writing - Hitachi CP-RX80 Operating Manual

Item
(1) Use the
(2) Use the
MY TEXT
When it is set ON, the MY TEXT will be displayed
DISPLAY
on the START UP screen and the INPUT_
INFORMATION when the INFORMATION on the
SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
(1) Use the
(2) The current MY TEXT will be displayed
MY TEXT
WRITING
(3) To change an already inserted
(4) To fi nish entering text, move the cursor to the OK on screen and press
•
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
/ buttons on the SECURITY menu to
select the MY TEXT DISPLAY and press the
button to display the MY TEXT DISPLAY on/off
menu.
/ buttons on the MY TEXT DISPLAY on/off menu to select
on or off.
ON OFF
/ buttons on the
SECURITY menu to select the MY
TEXT WRITING and press the
button. The MY TEXT WRITING dialog
will be displayed.
on the fi rst 3 lines. If not yet written, the
lines will be blank.
Use the / / / buttons and the
ENTER or INPUT button to select and
enter characters. The RESET button
can be used to erase 1 character at
a time. Also if you move the cursor to
DELETE or ALL CLEAR on screen and
press the ENTER or INPUT button,
1 character or all characters will be
erased. The MY TEXT can be input up
to 24 characters on each line.
character, press the
move the cursor to one of the fi rst 3
lines, and use the /
move the cursor on the character to be
changed.
After pressing the ENTER or INPUT button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
the ENTER or INPUT button. To revert to the previous MY TEXT without
saving changes, move the cursor to the CANCEL on screen and press
the ENTER or INPUT button.
Description
/ button to
buttons to
SECURITY menu
51