Linksys E2000 User Manual page 16

Linksys E2000
WEP
WEP is a basic encryption method that is not as secure as
WPA .
NOTE:
If you select WEP as your Security Mode,
each device in your wireless network MUST use
WEP and the same encryption and passphrase .
Wireless Security > WEP
Encryption Select a level of WEP encryption, 40/64 bits
(10 hex digits) or 104/128 bits (26 hex digits) . The
default is 40/64 bits (10 hex digits) .
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
Key 1 If you did not enter a Passphrase, enter the WEP
key manually .
RADIUS
This option features WEP used in coordination with a
RADIUS server . (This should only be used when a RADIUS
server is connected to the Router .)
NOTE: If you select RADIUS as your Security
Mode, each device in your wireless network
MUST use RADIUS and the same encryption
and shared secret key .
Wireless Security > RADIUS
Advanced Wireless-N Router
Chapter 2: Advanced Configuration
RADIUS Server Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS
server . The default value is 1812 .
Shared Secret
Enter the key shared between the Router
and the server .
Encryption Select a level of WEP encryption, 40/64 bits
(10 hex digits) or 104/128 bits (26 hex digits) . The
default is 40/64 bits (10 hex digits) .
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
Key 2 If you did not enter a Passphrase, enter the WEP
key manually .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .
Disabled
If you choose to disable wireless security, you will be
informed that wireless security is disabled when you first
attempt to access the Internet . You will given the option to
enable wireless security, or confirm that you understand
the risks but still wish to proceed without wireless security .
NOTE: When wireless security is disabled,
anyone can access your wireless network at any
time .
Disabled
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .
14