Table of Contents
Advertisement
3D Comb
3D Comb is used to improve colour transitions and
colour quality of pictures.
By pressing
/
button, select 3D Comb. Press
/
button to set this feature On or Off.
Note: 3D Comb feature is not functional in NATU-
RAL picture mode.
Picture Zoom
By pressing
/
buttons, to change picture zoom to Auto,
Use
/
16:9, 4:3, Panaromic, 14:9 Zoom, Cinema, Sub-
title, or Zoom.
Reset
button, select Reset. Press
By pressing
/
"OK" button to reset the picture modes to factory
default settings.
Store
• By pressing
/
• Press
or "OK" button to store the adjustments.
"Stored" will be displayed on the screen.
Sound Menu
SOUND
Volume
Equalizer
Balance
Headphone
Sound Mode
Volume
By pressing
/
button to change the level of the Volume.
Equalizer
By pressing
/
button to change the Equalizer setting. In equalizer
menu, the mode can be changed to Pop, Rock, Jazz,
Flat, Classic or User. Select the desired frequency
by
/
button and increase or decrease the fre-
quency gain by pressing
Note: Equalizer menu settings can be altered only
when the Equalizer Mode is in User.
button select Picture Zoom.
button select Store.
select Volume. Press
select Equalizer. Press
/
button.
Balance
By pressing
to change the level of the balance.Balance level can
be adjusted between -32 and +32.
Headphone
By pressing
button to enter hedphone menu.
volume
By pressing
button to increase hp volume level. Press
decrease hp volume level. Headphone volume level
can be adjusted between 0 and 63.
sound mode
or
By pressing
/
button to change sound mode.
Sound mode is used to identify sound mode of the
headphone and can be set to mono, stereo, dual I or
dual II according to the transmission.
balance
By pressing
button to increase balance to the right. Press
button to decrease balance to the left. Balance level
can be adjusted between -32 and +32.
Press the "M" button to return to the previous menu.
Sound Mode
By pressing
button, you can select Mono, Stereo, Dual I or Dual II
mode, only if the selected channel supports that mode.
AVL
By pressing
set the AVL as on or off.
Effect
By pressing
to set Effect as on or off.
Dynamic Bass
Dynamic Bass is used to increase bass effect of the
TV set.
/
By pressing
pressing
/
or Off. It is not recommended to select High if listening
at high volume levels. There is a subwoofer output
/
that can accept an active subwoofer if you wish to
create very high levels of Bass.
Subwoofer is active only if Dynamic Bass is set to
Off.
Subwoofer
It is possible to connect an external, active subwoofer
to the set to give a much deeper bass effect.
English - 11 -
select Balance.Press
/
/
button, select Headphone. Press
/
button, select Volume. Press
/
button, select Sound Mode. Press
/
button, select Balance. Press
select Sound Mode. Press
/
select AVL
VL.Press
/
select Effect.Press
/
/
button, select Dynamic Bass. By
button set Dynamic bass to Low, High
/
button
button to
/
/
button to
/
button
Advertisement
Table of Contents
