Install Menu - Hitachi 37LD8550 Instructions For Use Manual

Language


By pressing /
 
By pressing / button, you can select the
language.
Ext-2 Out
/  button, select Ext-2 Out.

By pressing
You can set Ext-2 Out to TV, EXT-1, EXT-3,
EXT-4, EXT-5 or PC by pressing
Note: Only audio output is available for EXT-
3, EXT-5 and PC. The other options have
both audio and video outputs.
Default Zoom
/  button, select Default

By pressing
Zoom. You can set Default Zoom to Pan-
oramic, 4:3 or 14:9 Zoom by pressing
button. If there is no WSS or aspect ratio
(picture size) information and zoom mode is
selected as Auto by pressing the
then the zoom mode will automatically
change to Default Zoom setting. See also
Zoom Modes on page 17.
Blue Background
You can set the TV to automatically change
to a blue screen if the signal is weak or ab-
sent, or when there is no input from an exter-
nal device.
The Blue Background feature can be turned
on or off by pressing
Menu Background
/  button, select Menu

By pressing
Background. You can change menu back-
ground to Translucent or Opaque by press-
 
ing / button.
Menu Timeout


By pressing /
Timeout. Press 
/
timeout to 15 sec, 30 sec or 60 sec.
Teletext Language

By pressing /

Language. Press
Teletext Language to West, East, Cyrillic,
Turk/Gre or Arabic. This will normally be set
to West for Western Europe.
button, select Language.
 
/ button.
button,
 
/ button.
button, select Menu

button to change menu
button, select Teletext
 
/ button to change

Install menu

By pressing
icon. Install menu appears on the screen.
Program
Band
Channel
Colour System
Sound System
Fine Tune
Search
VCR
Store Program
Program
 
/
By pressing

Press /
number. You can also enter a number via
digit buttons on the remote control. There
are 100 program storage between 0 and 99.
Band
Band can be selected either "C" or "S" by

pressing
Channel
Channel can be changed by
Digit Buttons.
Colour System
By pressing
System. Press
colour system to PAL, PAL60, SECAM or
AUTO.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing
System. Press
sound system to BG, DK, I or L/L'.
Fine Tune
By pressing
 
Press /
- 13 -
 
/ button, select the fourth
INSTALL

button, select Program.

/

button to select the program

/ button.


button, select Colour
/

 
/ button to change the

button, select Sound
/

 
/ button to change the

button, select Fine Tune.

/
button to adjust the tuning.
1
C
12
AUTO
BG
0
224.25
Off

/ button or