Lightolier OB Series Installation Instructions

DIMENSIONS
1
1-7/8" Dia. K.O.
7/8" Dia. Holes (3)
5-61/64"
16" (406mm)
(151mm)
23-61/64" (608mm)
2
REMOVING LENS
Place fingers between Lens and Housing. Pull
Lens on Top and Bottom Spring-loaded Latches
away from Housing. Release Lens from Bottom
Spring-loaded Latches and lift Lens to clear Top
Spring-loaded Latches to remove Lens.
Lens
4
REPLACING LENS
Hook Lens onto Top Spring-loaded Latches.
Hook Lens onto Bottom Spring-loaded Latches.
Push Lens and Spring-loaded Latches towards
Housing until Lens is secured to Housing.
© Lightolier 2003
Lightolier
45 INDUSTRIAL WAY, WILMINGTON, MA 01887
OVER BED (OB SERIES) INSTALLATION INSTRUCTIONS
3/16" x 5/8" Oval K.O.'s (4)
32" (813mm)
47-57/64" (1216mm)
Top Spring-loaded Latch (2)
Housing
Bottom Spring-loaded Latch
6'-0"
(1829mm)
3
INSTALLING LAMPS
For lamp (by others) installation follow diagram.
Four (4) lamp - positions 1, 2, 3, 4
Three (3) lamp - positions 1, 2, 4
Two (2) lamp
Top Spring-loaded Latch (2)
Lens
Bottom Spring-loaded Latch
59-31122-000
Fixture
Wall
- positions 2, 4
1
2
3
4
Housing
Printed in U.S.A.