McAfee HISCDE-AB-IA - Host Intrusion Prevention Product Manual page 82

Working with Host Intrusion Prevention Clients
Overview of the Windows client
IfAllow disabling of features from the tray icon is selected in an applied Client UI policy,
these additional commands are available:
Table 10: McAfee Agent 4.0 menu with Allow disabling
Click...
Restore Settings
Disable All
Disable IPS
Disable Firewall
If Enable timed group from McAfee tray icon menu on the Schedule tab is selected for a
firewall group in an applied Firewall Rules policy, these additional commands are available:
Table 11: McAfee Agent 4.0 menu with Enable timed group
Click...
Enable Host IPS Timed Firewall Groups
View Host IPS Timed Firewall Groups Status
With McAfee Agent 4.5
Right-click the McAfee Agent icon in the system tray, then select Manage Features | Host
Intrusion Prevention to open the console.
NOTE: Both the McAfee Agent and the Host IPS client must be set to display an icon for this
access. If the McAfee Agent does not appear in the system tray, there is no access to Host IPS
with a system tray icon, even though the client may be set to display a tray icon.
Under Quick Settings, these Host Intrusion Prevention options are available if the Allow
disabling of features from the tray icon option is selected in an applied Client UI policy:
Table 12: McAfee Agent 4.5 menu Quick Settings
Click...
Host IPS
Network IPS
Firewall
Also under Quick Settings, if the Enable timed group from McAfee tray icon menu
option on the Schedule tab is selected for a firewall group in an applied Firewall Rules policy,
these additional commands are available:
Table 13: McAfee Agent 4.5 menu with Enable timed group
Click...
Enable Host IPS Timed Firewall Groups
82 McAfee Host Intrusion Prevention 8.0 Product Guide for ePolicy Orchestrator 4.5
To do this...
Enable all disabled features. Available only if either feature
has been disabled.
Disable IPS and Firewall features. Available only if both
features are enabled.
Disable the IPS feature. This includes both Host IPS and
Network IPS functionality. Available only if the feature is
enabled.
Disable the Firewall feature. Available only if the feature
is enabled.
To do this...
Enable timed firewall groups for a set amount of time to
allow non-network access to the Internet before rules
restricting access are applied. Each time you select this
command, you reset the time for the groups.
View the names of the timed groups and the amount of
time remaining for each group to be active.
To do this...
Toggle Host IPS protection on and off.
Toggle Network IPS protection on and off
Toggle Firewall protection on and off.
To do this...
Enable timed firewall groups for a set amount of time to
allow non-network access to the Internet before rules