Using The Aux Source; Selecting Aux As The Source; Setting The Aux Title - Pioneer AVH-P6400 Operation Manual

Other Functions

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner's manual.

Selecting AUX as the source

Press to select
SOURCE
Press until
SOURCE AUX
• If the auxiliary setting is not switched on,
cannot be selected. For more details, see
Switching the auxiliary setting on page 64.

Setting the AUX title

The title displayed for the
changed.
1 After you have selected
press and the AUX SOURCE MENU is
A.MENU
displayed.
2 Press 5 or ∞ to select
.
A.MENU
AUX MENU is displayed.
3 Press 5 or ∞ to select
press .
A.MENU
NAME EDIT adjustment indications are dis-
played.
4 Press to select the desired charac-
A.MENU
ter type.
Press repeatedly to switch between the
A.MENU
following character type:
(Upper case),
Alphabet
(Lower case)—
Alphabet
as those with accents (e.g. á, à, ä, ç)
as the source.
AUX
appears in the display.
AUX
source can be
AUX
as the source,
AUX
, and press
AUX
, and
NAME EDIT
and —
Numbers Symbols
, such
European letters
5 Press 5 or ∞ to select a letter of the alpha-
bet.
Each press of 5 will display a letter of the alpha-
bet in , numbers and symbols in
A B C ... X Y Z
order. Each press of ∞ will display a
3 ... @ # <
letter in the reverse order, such as
order.
6 Press 3 to move the cursor to the next
character position.
When the letter you want is displayed, press 3
to move the cursor to the next position and then
select the next letter. Press 2 to move back-
wards in the display.
7 Move the cursor to the last position by
pressing 3 after entering the title.
When you press 3 one more time, the entered
title is stored in memory.
8 Press to return to the playback
BAND/ESC
display.
Section
14
1 2
Z Y X ... C B A
67
En