Basic Operation; Storing Broadcast Stations - Pioneer AVH-P6400 Operation Manual

Section
TV Tuner
10
Display and indicators
1
The following explains how to use this product
to control a TV tuner, which is sold separately.
• With this product, you can operate preset
channel list as one additional function.
• Press to switch between TV and P.CH list
DISP
displays.
1
indicator
BAND
Shows which band the TV is tuned to,
.
TV2
2
PRESET NUMBER
Shows what preset has been selected.
3
indicator
CHANNEL
Shows what channel has been selected.

Basic operation

1 Press
SOURCE
Press until
SOURCE
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press 2 or 3 to tune in to a station.
• If you press and hold 2 or 3 for about one
second and then release, you can perform seek
tuning.
46
En
2 3
TV1
indicator
to select the TV tuner.
appears.
TV

Storing broadcast stations

1 Press 5 or ∞ to select
the TV MENU, and press
P.CH MEMORY indications are displayed.
2 Pressing 2 or 3 for one second enables
fine frequency adjustment.
3 Press 5 or ∞ to select the Preset No. you
,
want to use to memorize.
Press 2 or 3 for two or more seconds. When
you stop pressing, a strong broadcast is
received.
3: Starts seek from a high frequency.
2: Starts seek from a low frequency.
Press the opposite 2 or 3 to the one you
pressed to start seek to stop it.
4 Press
A.MENU
rized.
Note
• Up to 12 stations can be memorized in one
band.
P .CH MEMORY
.
A.MENU
and the frequency is memo-
from