Chicago Electric 92496 Assembly And Operating Instructions Manual page 9

IMPORTAnT! The Pressure Adjusting Screw (18) on the Acetylene Regulator and
5.
the Pressure Adjusting Screw (A18) on the Oxygen Regulator should be opened
slightly by turning counterclockwise to relieve pressure on the Regulator diaphragms
before opening the cylinder valves. If this is not done, pressure from the cylinders
may damage the diaphragms and render the Regulators inoperable.
RED
AcETYlEnE
REGUlATOR
(parts 1-19)
PRESSURE
ADJUSTInG
ScREW
(18)
AcETYlEnE
cYlInDER
(nOT InclUDED)
Connect the GREEn and RED Welding Hoses (D1A, or D1B) to the proper con-
6.
nections on the Torch Handle (parts B1-B10).
WARnInG! If any traces of oil or grease are found, do not use. contact
SKU 92496
GREEn
OxYGEn
REGUlATOR
(PARTS A1-A20E)
PRESSURE
ADJUSTInG
ScREW
(A18)
cYlInDER
VAlVE
fIGURE E
PAGE 9
WElDInG nOZZlE (D4),
OR cUTTInG nOZZlE (D6)
cYlInDER
VAlVE
TORcH
HAnDlE
(PARTS B1-B10)
GREEn
WElDInG
HOSE
(D1B)
OxYGEn
cYlInDER
(nOT InclUDED)
cUTTInG
ATTAcHMEnT
(PARTS c1-c27)
RED
WElDInG
HOSE
(D1A)
REV 08g