Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20e
61610
Advertisement
Related Manuals for Chicago Electric 61610
Summary of Contents for Chicago Electric 61610
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 61610 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
- Page 2 Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 61610...
- Page 3 Do not use auto-darkening helmets in the prescriptions to determine if your judgment presence of flammable gases or liquids. or reflexes are impaired while taking drugs. If there is any doubt, do not weld. Item 61610 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Do not immerse the filter in water. 19. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. SaVE tHESE inStrUctiOnS. Page 4 For technical questions, please call 1-888-866-5797. Item 61610...
- Page 5 Delay Control Knob, Sensitivity Control Knob Shade Guide chart arc current (amperes) Welding process Stick/Arc Mild Steel MIG (argon shielded) Mild Steel MIG, shielded) Aluminum MIG Flux Core Plasma Cutting Plasma Welding Item 61610 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Knob clockwise to Grind. this turns off the shade function so the helmet lens stays clear. Use this function to provide protection while grinding. caUtiOn! Set the helmet to the proper shade setting before welding again. Page 6 For technical questions, please call 1-888-866-5797. Item 61610...
- Page 7 To attach a magnifying cheater lens (sold separately) to the inside of the helmet, slide the cheater lens into place underneath the tabs located on the lower right and left sides of the Lens Retaining Frame. Item 61610 For technical questions, please call 1-888-866-5797.
- Page 8 Headband is not adjusted properly Sensitivity Adjustment Knob to the (must be lowered). “MAX” position, if necessary). Stop using the Helmet immediately if any of the mentioned problems cannot be corrected. Page 8 For technical questions, please call 1-888-866-5797. Item 61610...
- Page 9 4. Do not remove the Auto-Darkening Filter from the Auto-Darkening Welding Helmet. Do not try to open the Filter. 5. Storage temperature: - 4 ° to 158° F. Item 61610 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 Front Cover Lens Shell (Welding Mask) Auto-Darkening Filter Inside Cover Lens Headgear Assembly Sweatband Washer Left Limitation Washer Limitation Washer Washer Tension Adjustment Knob Right Limitation Washer Screw Adjustable Headband Front Headgear Page 10 For technical questions, please call 1-888-866-5797. Item 61610...
- Page 11 If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175341815 when ordering parts. Item 61610 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.