Mitsubishi Electric 3D DLP 742 Series Owner's Manual page 35

Lock, continued
Using TV Locks
After you set the lock, you must use your pass code to:
• View a locked program
• View a locked channel
• View the locked TV
• Cancel the lock
• Open the Lock menus
Tips for Using the Lock Menu
When entering the Lock menu, you will be prompted to
enter a pass code.
• To change the pass code, press 9 and LAST at the
same time. Either enter a new pass code to open
the Lock menu and make changes or press EXIT to
close the menu.
• If any of the locks are turned on and you exit the
menus when prompted for a new code, the old code
and all lock settings will be retained.
IMPORTANT
When changing or deleting your pass code,
you must use the remote control included
with this TV. You cannot use a Mitsubishi
remote control from another component or a
"universal" remote.
2. TV Menus
• If all locks are turned off and you exit the menus
when prompted for a new code, then the previous
code will be erased.
Bypassing TV Locks
• If you try to watch a blocked program or channel
or the TV is locked by time, a notice will appear
prompting you for a pass code. To use the TV, input
your four-digit pass code and press ENTER.
• If a program is blocked, you can still use the TV
without entering a pass code. Change to a channel
airing an allowed program or change to another
device.
• If you forget your pass code, you can view the
locked TV without entering your pass code. When
prompted for the pass code, press 9 and LAST keys
on the TV remote control at the same time. This
process temporarily unlocks the TV.
For assistance call 1(800) 332-2119
35